Realtime Channel ListΒΆ

Following channels are calculated by the OXYGEN Power realtime group:

Hint

If line-line wiring is applied, the power group values are calculated per single phase U1 and between phases U12.

  • Freq - The fundamental frequency of the assigned phase

  • PhaseUpdated - Boolean indicator when the power values are updated, meaning the power period is complete

  • Voltage (U) - Grouping for voltage based channels

    • U_tRMS_RT - Total effective voltage over all phases

    • Un _tRMS_RT - Effective voltage of phase n

    • Un _tPP_RT - Peak-Peak voltage of phase n

    • Un _tAVG_RT - Average voltage of phase n

  • Current (I) - Grouping for current based channels

    • I_tRMS_RT - Total effective current over all phases

    • In _tRMS_RT - Effective current of phase n

    • In _tPP_RT - Peak-Peak current of phase n

    • In _tAVG_RT - Average current of phase n

  • Active Power (P)

    • P_t_RT - Total active power over all phases

    • Pn _t_RT - Active power per single phase

  • Reactive Power (Q)

    • Q_t_RT - Total reactive power over all phases

    • Qn _t_RT - Reactive power per single phase n

  • Apparent Power (S)

    • S_t_RT - Total apparent power over all phases

    • Sn _t_RT - Apparent power per single phase n

  • Power Factor (PF)

    • PF_t_RT - Power factor over all phases

    • PFn _t_RT - Power factor per single phase n

  • DC

    • Un _DC_RT - DC voltage per single phase n

    • In _DC_RT - DC current per single phase n

    • Pn _DC_RT - DC active power per single phase n

    • U_DC_RT - DC voltage over all DC groups (same as U1_DC for only one group)

    • I_DC_RT - DC current over all DC groups (same as I1_DC for only one group)

    • P_DC_RT - DC active Power over all DC groups (same as P1_DC for only one group)

  • Mechanical

    • nn _AVG_RT - Average of speed per mechanical power analysis updated after every Period or multiple if set with Averaging (periods)

    • Mn _AVG_RT - Average of torque per mechanical power analysis updated after every Period or multiple if set with Averaging (periods)

    • P_mn _RT - Power per mechanical power analysis for mechanical group n

    • P_m_RT - Power over all mechanical groups

  • Efficiency

    • Eta_dc_ac_RT - Efficiency from DC to AC

    • Eta_m_RT - Efficiency from AC to mechanical

    • Eta_sys_RT - System efficiency from DC to mechanical

  • Waveform Data - Grouping for waveform data channels

    • Un _RT - Resampled voltage raw data per phase

    • In _RT - Resampled current raw data per phase

    • nn _RT - Resampled speed raw data per mechanical power analysis

    • Mn _RT - Resampled torque raw data per mechanical power analysis

    • AI 1/1_rt - AUX channel in Last value mode, only available if added with AUX CHANNELS (see section AUX Channels)

    • AI 1/1_rt_AVG - AUX channel in AVG mode, only available if added with AUX CHANNELS (see section AUX Channels)

    • AI 1/1_rt_RMS - AUX channel in RMS mode, only available if added with AUX CHANNELS (see section AUX Channels)