OXYGEN Power Realtime

Available for OXYGEN 8.1 and above in Ubuntu 24.04

Contents

• Preface
• Document History
• Overview
• Setting up Ubuntu 24.04
  • Operating system & Ubuntu kernel version
    • 1. Check Linux kernel version
    • 2. Check preemptive scheduler
    • 3. Automatically configure scheduler at startup
    • 4. Setting Power Mode to Performance
• Setting up OXYGEN
  • OXYGEN DAQ Hardware Setting
  • Power Group Realtime Settings
    • UDP Output
    • EtherCAT Output
    • AUX Channels
  • Available Power Group Realtime Channels
• Realtime Channel List
• Application Examples
  • Power group overview
  • Setting up a 3-phase line-line power group
  • Power group settings
    • Efficiency tab
    • Configure counter for realtime speed input
    • Realtime tab
• Troubleshooting / Tipps
  • Realtime power option not available
  • Only TRION hardware channels are valid for realtime calculations
  • Replacing the counter speed channel by the scaled frequency channel
  • Fundmental Frequency not detected correctly
  • EtherCAT slave not sending the correct channels